Couplers

Directional couplers are general microwave/millimeter wave components that can be used for signal isolation

Couplers

Directional couplers are general microwave/millimeter wave components that can be used for signal isolation, separation and mixing, such as power monitoring, source output amplitude stabilization, signal source isolation, transmission and reflection frequency sweep testing, etc.
The main technical indicators are directivity, standing wave ratio, coupling degree and insertion loss.

PRODUCTION CAPACITY OF COUPLERS

Couplers

※ The following is partial list of directional couplers and their specifications that we have produced.

Model	Freq Range (MHz)	Coupling (dB)	Directivity (dB)	VSWR	IL (dB)	Connector	Dimension (mm)
3CP-800/2500-100-05dB	800-2500	5±0.6	>=22	1.2	<=0.15	N-50K	156×58×16.5
3CP-800/2500-100-10dB	800-2500	10±0.8	>=22	1.2	<=0.15	N-50K	156×58×16.5
3CP-800/2500-100-15dB	800-2500	15±0.8	>=22	1.2	<=0.15	N-50K	156×58×16.5
3CP-800/2500-100-20dB	800-2500	20±1.0	>=22	1.2	<=0.15	N-50K	156×58×16.5
3CP-800/2500-100-30dB	800-2500	30±1.0	>=22	1.2	<=0.15	N-50K	156×58×16.5
3CP-800/2500-100-40dB	800-2500	40±1.0	>=22	1.2	<=0.15	N-50K	156×58×16.5
3CP-800/2500-100-50dB	800-2500	50±1.0	>=22	1.2	<=0.15	N-50K	156×58×16.5
BCP3200-300-05dB	800-2500	5±0.6	>=22	1.2	<=0.15	in：L29-50K,out：L29-50J	168×74×32.5
BCP3200-300-10dB	800-2500	10±0.8	>=22	1.2	<=0.15	in：L29-50K,out：L29-50J	168×74×32.5
BCP3200-300-15dB	800-2500	15±0.8	>=22	1.2	<=0.15	in：L29-50K,out：L29-50J	168×74×32.5
BCP3200-300-20dB	800-2500	20±1.0	>=22	1.2	<=0.15	in：L29-50K,out：L29-50J	168×74×32.5
BCP3200-300-30dB	800-2500	30±1.0	>=22	1.2	<=0.15	in：L29-50K,out：L29-50J	168×74×32.5
BCP3200-300-40dB	800-2500	40±1.0	>=22	1.2	<=0.15	in：L29-50K,out：L29-50J	168×74×32.5
BCP3200-300-50dB	800-2500	50±1.0	>=22	1.2	<=0.15	in：L29-50K,out：L29-50J	168×74×32.5

Leave a Message